Engineered Shells. Zero Tile. Maximum Lifespan.
Stainless Steel Spa Pool Design
Every spa pool we build starts with a simple goal — make it last. These units are fully welded from AISI 316 or 304 stainless steel, assembled and tested at our facility, and shipped ready to install. No coatings. No ceramic. Just structural integrity and functional hydromassage.
- 4–12 stainless steel hydromassage jets
- Ergonomic seating and footwell geometry
- Flush-mounted LED lighting (optional)
- Overflow channel with removable grates
- Integrated air system available on request
Designed to work — in daily use, not just for show.
No Curing, No Sealants — Just Drop and Connect.
Pool Dry Installation for Any Deck
ProGorki spa pools arrive ready for placement. We eliminate wet trades from the equation — no tiling, no sealants, no on-site welding. That means faster commissioning, lower cost, and better quality control.
- Monolithic or sectional delivery
- Mounted flush into tiled or PVC-finished decks
- ADA-compliant access: grab rails, step entry
- Compatible with existing filtration/control systems
- Install time: 1–2 days on average
No delays. No site improvisation. Just plug it in and fill.
Built to Handle Heat, Chemicals, and Continuous Operation.
Commercial-Grade Spa Pool for Daily Use
Steel doesn’t delaminate, blister, or fade. The spa pool shell stays watertight year after year — even in high-chlorine or high-temperature conditions. All seating and pipework is accessible. Water drains fully after each cycle.
- Welded drain, no standing water
- 8–12 year maintenance interval for jets
- Fully serviceable components
- Thermal insulation upgrade available
- CE-compliant for commercial and clinical use
Made for wellness centers, rehab facilities, and any spa that runs more than just weekends.
Installations in Hotels, Clinics, and Wellness Centers
SPA Pool Gallery
SPA Pool Technical Highlights
| Component | Specification |
|---|---|
| Shell Material | Stainless Steel AISI 316 or 304 |
| Finish | #3 Polished Interior, Fully Welded |
| Configuration | Monolithic or Sectional, Factory-Built |
| Hydromassage Jets | 4 to 12, Adjustable Positioning |
| Air Injectors | Integrated, Optional Zones |
| Lighting | LED Spotlights, Flush-Mounted |
| Overflow System | Perimeter Channel with Removable Grates |
| Drainage | Central Drain, Fully Flushable |
| Access | Built-in Steps or Grab Rails (ADA Optional) |
| Installation | Dry, No Concrete or Tiling Required |
| Control Options | Manual or Automatic (On Demand) |
FAQ
1–2 days. The spa arrives pre-tested and mounts directly into the prepared zone.
Yes. It connects to standard pool filtration, or we can include a standalone circuit.
Stainless steel AISI 316 (marine-grade) or 304, fully welded and polished.
Every 8–12 years, depending on water chemistry and usage hours.
Both. The structure is chemically and thermally resistant — no delamination or fade.
Yes. Jet placement, number, seating depth, and lighting are configured to your spec.
Get Technical Drawings →
Send Layout & Requirements
Ready to Specify Your Spa Pool?
Send us your project layout and system requirements. We’ll prepare a technical configuration with jet zones, access options, and panel sizing — based on real conditions.
